欢迎光临泰森试验设备有限公司官网!

  • 官方微博
  • 官方微信
  • 咨询热线:0755-23593495
/ EN

您现在的位置 : 网站首页 > 新西兰PT

LPCH

产品简介:

The LPCH is fitted with an industry standard M12 sensor connector with IP67 sealing and is supplied with a straight mating connector. The connector simplifies installation and maintenance and a cable type and length to suit the requirements of the installation can be selected from the cable packs offered by PT. Six wire cables should be installed by connecting the Sense+ with the Excitation+ to terminal 1 and the Sense- with the Excitation- to terminal 2 inside the connector.

High accuracy alloy steel construction
Ideal for materials testing, overhead and
low profile weighing.
Rugged with high overload capacity
Standard mountings-replaces LPC and
other market leaders
Recessed holes for flush mounting
Standard IP67 M12 sensor connector

产品详情
文件下载
SPECIFICATIONS      
Signal Outpu at Capacity
Linearity Error
Non-Repeatability
Combined Error
Hysteresis
Creep/(30 mins.)
Zero Balance
Temperature Effect on Span(/10C)
Temperature Effect on Zero/10ºC
Operating Temperature Range
Compensated Temperature Range
Storage Temperature Range
Excitation +ve
Signal +ve
2±0.01 mV/V
< 0.020% FSO
< 0.020% FSO
< 0.030% FSO
< 0.020% FSO
< 0.020% FSO
< 2% Capacity
< 0.02% FSO
< 0.02% FSO
-35 ~ 65 C
-10 ~ 50 C
-50 ~ 85 C
Connector Pin 1
Connector Pin 4
Service Load
Safe Load
Safe Side Load
Ultimate Load
Input Resistance
Output Resistance
Insulation Resistance
Excitation Voltage (Rec)
Excitation Voltage (Max)
Connector
Material
Sealing
Excitation -ve
Signal -ve
100%  Capacity
150% Capacity
100% of axial load
300% Capacity
750Ω ±5Ω
700Ω ±3Ω
> 5000 MΩ (@50 VDC)
5 ~ 15 V AC/DC
20 V AC/DC
M12 Sensor type...
Alloy steel, nickel plated
IP67 
Connector Pin 2
Connector Pin 3
 
DIMENSIONS CAPACITIES
LPCH Model
LPCH-1t
LPCH-2.5t
LPCH-5t
LPCH-10t
LPCH-25t
LPCH-50t
LPCH-100t
 
Capacity
1t
2.5t
5t
10t
25t
50t
100t

Dimensions (mm)
Capacity          Order            A B C   D     E      F G H ØI J Weight(kg)
1t LPM1000T000XX1 35 105 3 65 33 22.5°   8 Holes Ø 7.2 PCD 88.9 5/8" - 18UNF 10.5 8.5 1.6
2.5t LPM2500T000XX1 35 105 3 65 33 22.5°   8 Holes Ø 7.2 PCD 88.9 5/8" - 18UNF 10.5 8.5 1.6
5t LPM5000T000XX1 35 105 3 65 33 22.5°   8 Holes Ø 7.2 PCD 88.9 5/8" - 18UNF 10.5 8.5 1.6
10t LPM010TT000XX1 44.5 155 3 90 62 15° 12 Holes Ø 10.5 PCD 130.2 1-¼" - 12UNF 17 10 4.7
25t LPM025TT000XX1 44.5 155 3 90 62 15° 12 Holes Ø 10.5 PCD 130.2 1-¼" - 12UNF 17 10 4.7
50t LPM050TT000XX1 63.5 205 6.5 115 89 11.25º 16 Holes Ø 13.5 PCD 165.1 1-¾" - 12UNF 20 13 11.7
100t LPM100TT000XX1 90 280 13 152 123 11.25º 16 Holes Ø 17.5 PCD 228.6  2-¾" - 8UNF 25 16 29.5
(Due to PT’s policy of continuous development, specifications and products offered are subject to change without notice.)