欢迎光临泰森试验设备有限公司官网!

  • 官方微博
  • 官方微信
  • 咨询热线:0755-23593495
/ EN

您现在的位置 : 网站首页 > 新西兰PT

SLSP

产品简介:

The SLSP Stainless Steel Sensor Pin series of load measurement pins are designed for general use. They are machined from high tensile stainless steel and are normally supplied complete with anti-rotation flats or plates. The standard sensor pin is supplied exactly as per the technical data sheet and is ordered by specific part number for each capacity. However the nature and style of the SLSP product means that just about any existing structural pin or a new design concept pin can be manufactured. We meet many customers’ specific dimensional requirements and have huge databases of past sensor pin designs, many of which may suit your specific requirements without alteration.

产品详情
文件下载
The SLSP Standard Series can be supplied as shown in the SLSP Standard Series datasheet (as below) or it can be modified to meet a particular application requirement. We are always pleased to discuss any special requirements that can be accommodated. The SLSP series can be supplied as is or combined with our extensive range of instrumentation to provide a complete load monitoring system. 
Specifications may vary depending upon installation and loading specifics. The mating connector accommodates PT cable packs diameter 4 ~ 8mm (not supplied). For 6 wire cables connect the appropriate Sense and excitation wires to the same connector terminal.
  SLSP
  • Welded stianless steel 17-4PH construction
  • IP67, potted with DoubleSeal protection.
  • The Standard Series SLSP fits a standard 2130 High Load shackle
  • Optional centering sleeve and anti-rotation cleat.
  • Integral M12, 4 pole male sensor conector
  • Mating female connector supplied.
SPECIFICATIONS      
Signal output at capacity
Linearity Error
Non-Repeatability
Combined Error
Hysteresis
Creep/(30 mins.)
Zero Balance
Temperature Effect on Span/10ºC
Temperature Effect on Zero/10ºC
Operating Temperature Range
Storage Temperature Range
Excitation +ve
Signal +ve
1.3 ~ 1.5 mV/V
< 0.500% FSO
< 0.050% FSO
< 1.000% FSO
< 0.100% FSO
< 0.100% FSO
< 1% Capacity
< 0.030% FSO
< 0.070% FSO
-20 ~ 60 C
-50 ~ 85 C
Connector Pin 1
Connector Pin 4
Service Load
Safe Load
Safe Side Load
Ultimate Load
Input Resistance
Output Resistance
Insulation Resistance
Excitation Voltage (Rec)
Excitation Voltage (Max)
Cable (screw connector)
Material
Excitation -ve
Signal -ve
100% Capacity
150% Capacity
100% Capacity
300% Capacity
800Ω ± 50Ω
705Ω ± 5Ω
< 5000 MΩ  (@50 VDC)
5 ~ 20 V AC/DC
25 V AC/DC
M12 male 4 pole
17-4PH Stainless Steel
Connector Pin 2
Connector Pin 3
 
DIMENSIONS CAPACITIES
SLSP Model
SLSP-6.5t
SLSP-12t
SLSP-25t
SLSP-55t
Capacity
6.5t
12t
25t
55t

Dimensions mm(inches)
Capacity Order A B C D E F G H I J K L T Weight
6.5t SLSP6500S000XX 10.0 22.5 80 25.0 19.0 42.0 5.0 22.0 36.0 33 34 142.5 (1" x 8 tpi UNC) 0.9kg
12t SLSP012TS000XX 15.0 31.5 115 35.0 25.0 52.0 8.5 32.0 51.0 41 42 191.5 (1-3/8" x 6 tpi UNC) 1.8kg
25t SLSP025TS000XX 20.0 46.0 165 50.8 42.0 63.0 11.0 46.0 73.0 54 55 266.0 (2" x 4.5 tpi UNC) 4.5kg
55t SLSP055TS000XX 25.0 63.0 235 70.0 62.0 88.0 15.0 65.0 105.0 74 75 358.0 (2-¾" x 4 tpi UNC) 12.1kg
(Due to PT’s policy of continuous development, specifications and products offered are subject to change without notice.)