Static/Dynamic
| Measurement Range (°)1 | ±1 | ±3 | ±14.5 | ±30 | ±60 |
|---|---|---|---|---|---|
| Relative Accuracy (° typical)2 | 0.004 | 0.004 | 0.004 | 0.004 | 0.004 |
| Digital Resolution (° max) | 0.0001 | 0.0001 | 0.0001 | 0.0001 | 0.0001 |
| Repeatability (°) | 0.01 | 0.01 | 0.01 | 0.01 | 0.01 |
| Bias Over Temperature (PPM/°C, typical) | 80 | 80 | 80 | 80 | 80 |
| Transverse Axis Misalignment (° max) | 0.25 | 0.25 | 0.25 | 0.25 | 0.25 |
| Bandwidth (Hz, nominal) (-3dB) | (Sample Rate)/4 | ||||
| Non-linearity (% FS), (-20°C to 50°C) | 0.60 | 0.20 | 0.05 | 0.03 | 0.02 |
| Accuracy – Temperature Sensor (°C, max) | ±2 | ±2 | ±2 | ±2 | ±2 |
| Warm Up Time (seconds, typical) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
Electrical/Protocol
| Number of Axes | 1 or 2 |
| Input Voltage Range (VDC) | 5 min, 9 to 36 typ, 38 max, reverse wiring protected |
| Power- RS-485 Termination Enabled (mW, max) | 800.0 |
| Power- RS-485 Termination Disabled (mW, max) | 600.0 |
| Galvanic Isolation – Power Inputs (rms) | 2000 |
| Protocol | Half Duplex, Proprietary ASCII, & MODBUS-RTU |
| Baud (bps)3 | 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 500000 (max) |
| Communication Settings3 | 8 bits, 1 stop bit, even | odd |
| Data Sample Rate (Hz)3 | 3.9, 7.8, 15.6, 31.2, 62.5, 125 |
| Node ID3 | 0+last 2 digits of serial number |
| Filtering | User selectable |
| Bus Termination – Internal (120Ω)3 | On/Off |
Environment/Mechanical
| Operating Temperature Range | -40° to +85 °C |
| Storage Temperature Range | -55° to +105 °C |
| Shock | 18 g, 0.011 sec, ½ sine |
| Vibration | 20 grms 5Hz to 2KHz |
| Seal | IP67 (when mated to IP67 connector) |
Notes:
1: Custom ranges available by request
2: Observed using noise reduction methods
3: User selectable, default is bold
4: NIST Certification Range up to ±45°, Calibrated Temperature Range of -30 °C to +60 °C
5: Specifications subject to change without notice on account of continued product development
