TX13模拟信号变送器具有高精度，高可靠性，导轨式安装等特点，适合集成到过程控制系统中。
通过数字式控制核心，可以非常方便的应用旋钮式开关进行校正。
信号输出可设置为4-20mA，0-20mA，0-10VDC或0-5V，-10～+10 V(TX13F)，它的高性能高质量的模拟和数字硬件电路能最大限度的减少零点和量程的漂移。
TX13带有RS232C接口和一对输入输出IO点。
TX13可以通过RS232C接口和xFace软件连接，进行无砝码电子等效校正。
TX13的两个输出关断点可以通过仪表前面板上的旋钮式开关或者PC机上的xFace软件设置。
TX13 analog load cell transmitter converts load cell signal to analog output very fast and accurately. Programmable smart filter of TX13 minimizes the environmental vibration to produce the best filtered signal to your PLC for your weight and
force measurement systems. Its high quality analog & digital hardware eliminates zero and span drifts caused by temperature changes and provides perfect stability for long term unlike traditional analogue transmitters.
Analogue output is programmable as 4-20 mA, 0-20 mA, 0-10 V, 0-5 V. TX13F has additionally -10 to 10 V analog output range. All instruments are normalized and matched in the production for direct replicement when calibration done at the PLC side and to provide highest accuracy for electronic calibration (eCAL).
2 cut off outputs can be used for alarm or control valves; one digital input can be used for zeroing the scale.
Fast and Accurate Output
• Up to 800 conversion per second
• Programmable adaptive digital filter
• Up to 16 000 000 internal resolution
• Up to 60 000 analogue output resolution
• Very low zero and gain drift at temperature changes.
• Very low drift in long term.
Analog Output With
• Bipolar load cell signal input for force measurement
• 6 wire load cell connection for high accuracy
• 2 pcs relay contact cutoff outputs and one zeroing input
• Bipolar analogue voltage output
Typical Applications
• Tank and silo weighing
• Compressive and tensile tests
• Force measurement
• Strength measurement
• Process control applications
• Dosing systems
